If you live in a humid area, you will certainly be familiar with the dry mode setting in your area. When it’s a particularly wet day, but not too hot, and you roll your forehead sweat, this is your go-mode. At Air conditioner cleaning Brisbane, provide solutions in handling your Aircon cleaning needs.
Dry mode clean additional moisture in your bike chamber and the compressor for short periods of time. Meanwhile, the fan is constantly running at low speed. The compressor performance is adjusted so that when the aircon internal humidity sensor detects a sufficiently low humidity level, it is turned off.
To know the level of humidity in your home, you’ll need a hygrometer which measures temperature and relative humidity. The ideal relative humidity for health and comfort is about 30-50%. These levels vary in the winter months, you can find below the level of perfect indoor humidity by the outside temperature.
The ideal moisture retention in the house
The best tools to maintain the relative humidity at ideal levels in your home year are humidifiers and dehumidifiers throughout the house. These systems work automatically with your home heating and cooling systems to add or clean moisture from the air. Use a humidifier during the winter months when the air is naturally drier and a dehumidifier in the summer when the air naturally carries more moisture.
When it is a very humid day, but not too hot, and you have your forehead sweat rolling, this is the go-to mode. Dry mode eliminates the extra moisture in your room by cycling the compressor on and off for short periods of time. Meanwhile, the fan keeps running at low speed.
What should my AC humidity be set at?
The Consumer Product Safety Commission recommends a humidity level between 30 and 50 percent, while the Environmental Protection Agency recommends humidity 30 to 60 percent to reduce mold growth.
Why is my Aircon not cleaning humidity?
Usually your air conditioner lowers humidity by moist air circulation and your cooler evaporator coil. But if your air conditioner is not dehumidifying the air well, it may be because of one of these problems: Thermostat is set to “ON” instead of “AUTO” Dirty evaporator coil.
However, if the coil is covered with dirt or dust, become isolated from your air, meaning the coil can not properly cool or dehumidify the air. Other causes of high humidity will be the source of abnormal moisture invading your home. One source of the abnormal is going through some ductwork leaks. For example, if there is a leak in the return ductwork you (hand suck in air), that the leak will cause your Air conditioner to suck the humid air from your attic.
In addition, the Air con can not be adequately dehumidified because it is large (cooling capacity too).A large unit can cool your home too quickly, but they must do it at the right pace. Proper dehumidification takes time. To clean sufficient moisture for comfort, the Aircon sitting needs time to move a sufficient volume of air over the cooling coil. The Queensland government has tips on How an evaporative air cooler works.
Does air conditioners work harder in high humidity?
When the humidity spikes, however, most systems can not cope. High humidity cancels the air conditioning cooling effect. When humidity is too high, your building will feel warmer than it is. You may find yourself running the air conditioner harder longer and do not achieve the desired effects.
