Can a pressure washer clean your aircon?

Aircon Cleaning Service

An air conditioner consists of two coils, condenser coils and evaporator coils usually made of copper tubes with aluminum fins. The evaporator coil or indoor coil is often described as the “cold” coil, because it provides internal cooling. The coil acts by absorbing its heat from the ambient air, which is blown air handler fan through. The condenser coil or outdoor coil is because it rejects the heat as a fan blows air outside the “hot” coil over the surface. Goodway has to clean a plurality of coil cleaning solutions, both the condenser and evaporator coils.

If the coil is not complied with a slight dust or dirt contaminated with the ribs, low-pressure compressed air blows over the ribs or uses a soft brush to be sufficient. Is applying a clear water or mild air con cleaning Gold Coast solution on the surface, making it for a short time sitting then used in some cases to flush. Aggressive demand deposits, as required for the use of stronger cleaning solutions or solvents.

Do Pressure washers have adjustable pressure?

One of the most important features to look for on a large semi-pro gas pressure washer is variable or adjustable pressure controls. This way you can tailor the strength of PSI depending on your cleaning task. Variable pressure is especially important on power washers as powerful as these units.

Coils can be steam cleaned, but require care. The steam must be applied at low pressure and the current maintained parallel to the fins to prevent the bending of the fins more.

Another method of cleaning the coil popularly used is using a garden sprayer type pump for chemical foaming applied to the coil surfaces. The foam is allowed to remain on the surface to saturate the fins. The foam is then drawn up and the process is repeated. Finally, the coil is rinsed with clean water from a hose.

Perhaps the most popular cleaning method used in recent years using pressure washers to clean coils. pressurized cleaning coils may increase in the organic macromolecular air dust (MOD) to be contained in the cleaning zone being. cleaning the pressure should be done in the opposite direction of the airflow through the coil. A cleaning solution may be applied before the pressurized flushing fluid with the integrated chemical injection system on the high-pressure cleaner or a hand sprayer. Care must be taken when using a high-pressure cleaner to avoid damaging the fins on the tubes. The effluent of the battery should be free of particles. If not, repeat the process. Goodway offers a complete line of coil cleaning machines.

What PSI should be a power washer?

Most electric pressure washers create 1300-1700 psi pressure (PSI) with a water flow of 1.5 gallons per minute (GPM), but experienced contractors recommend 2,000 to 3,000 PSI and a flow of at least 2.5 GPM to the clean dirty concrete effectively. Homeowners usually find a PSI from 1300 to 2400 is sufficient to cope with their cleaning.

The CoilPro Model CC-140 is a self-contained two-wheeled cart with a built-in water and chemicals own tank that can operate on the strength of the building or an integrated rechargeable battery. It can carry 5 gallons of water or can be connected to the building’s water supply continues to operate. It supplies water flow up to 140 PSI at 1 GPM by way of one of the four spray nozzles are available. Onboard battery and water / chemical tank allows it to be used anywhere additional models including the CC-600 AC-powered unit that delivers up to 600 PSI 1.6 GPM for heavy rolls and CC-100 backpack unit coil cleaner for extreme portability. This product has been enthusiastically received by care professionals and they represent the first true real breakthrough progress in cleaning the coils in a long time.

3 thoughts on “Can a pressure washer clean your aircon?”

Leave a Reply to Kyaw Kyaw Belal Cancel Reply

Your email address will not be published. Required fields are marked *